Custom Stickers

Avoid using transfer stickers on fabrics, silicone, or glazed surfaces with adhesive repellents (e.g., powder coatings or certain plastic finishes). These stickers also don’t adhere well to hard paper surfaces, such as gift boxes, as they might damage the paper during application.

Transfer tape, sometimes called application tape, is a special film—either paper or plastic—that holds all parts of a Crystal Sticker design together for easy application. Once applied to your chosen surface, simply peel off the transfer tape to reveal the finished design.

Yes! Crystal Stickers can magically adhere to a wide variety of hard surfaces, including glass, ceramic, plastic, metal, wood, leather, concrete, and more. This versatility makes them ideal for personalizing laptops, mugs, cars, or even branding company equipment, packaging, and storefronts.

Yes, the minimum order is 10 stickers, and the size range is from 1 x 1 inch to 20 x 20 inches. Bulk orders come with discounts, so the more you order, the more you save!

No, Crystal Stickers don’t leave a visible background or residue. Each sticker comes with transfer tape and backing, and once applied, only the image remains, leaving a clean and professional look.

Ordering is easy! You can request a quote for your custom sticker pack directly on our website. If you need assistance, email us at info@snaplabels.ca to connect with a product expert.

Absolutely! We ship worldwide, please contact our product expert at info@snaplabels.ca for more details and a shipping quote.

Yes, for optimal results, we recommend these minimum dimensions:

Line Weights: 0.125 inches (0.3175 cm)

Dot Width: 0.125 inches (0.3175 cm)

Letter Size: 10 pt

You can use smaller; however, we can’t guarantee adhesion and longevity of the sticker.

To ensure the best quality for your custom Crystal Stickers, please follow these guidelines:

File Type: Upload in PNG format only.

Resolution: Use a minimum resolution of 300 DPI for sharp and clear results.

File Size: Upload at the size you want your stickers printed at

Design Details:

Avoid using translucent or fade effects—stick to opaque colors only to ensure proper adhesion.

Minimum line weight should be 10 pts for clean and precise printing.

File Preparation:

Upload your file exactly as it will be printed—make sure everything is finalized.

Use a transparent background to avoid unwanted edges or borders.

Artwork Quality:

Ensure the artwork is high-quality and not pixilated. Poor-quality input will result in subpar output.

By following these standards, you’ll get stunning stickers with the perfect finish!

Follow these simple steps to apply your Crystal Stickers for the best results:

Prepare the Surface:

• Clean the application surface thoroughly to remove dust, dirt, or oils.
• Ensure the surface is dry before proceeding.

Position the Sticker:

• Carefully place the sticker in your desired position.
• Use the transfer tape to align and secure the design for accurate placement.

Apply Pressure:

• Smooth the sticker onto the surface using a squeegee, credit card, or firm hand pressure.
• Work from the center outward to avoid air bubbles or wrinkles.

Remove the Transfer Tape:

• Slowly peel off the transfer tape at a sharp angle, ensuring the design adheres completely to the surface.
• If any part of the sticker lifts, press it back down and repeat.

Finish and Cure:

• Allow the sticker to fully bond with the surface for 24 hours, before washing or exposing it to water.

Enjoy your beautifully applied Crystal Sticker on your favorite item!